Product Feature:
1. Extruding unit can be moves forward and backward, cooperated with embossing unit fluctuate, which will be more convenient for changing roller and clean the t-die and increase the operational satety.
2. Screw is of Italy design which enhances the plasticizing capability, it incorporates with European imported static mixer to ensure melting of resins, homogeneous color and increase the quality of the sheets.
3. T-die is from EDI America, which enables the sheet thickness to be more even.
4. The gear is made in Italy, it has advantages of high efficiency, frictionless and low noise.
5. Temperature control uses SCR system, tolerance of temperature for that is ± 1º c. This may precisely control plasticizing processes, sheet thickness, flatness and neatness.
6. Embossing roller of diameter 600 mm and two-loop coiling system incorporates with microcomputer auto temperature system will precisely control temperature of embossing roller and cooling roller so as to make sheet to be flat and neat, keeping the thickness homogeneous.
7. Auto rewinder:
A. The production width can be set freely on the slitting device;
B. Auto rll over and cutting device increases the convenience on operation and improve the efficiency;
C. Japan made servo motor and America tension controller enable the precisely adjustment on rewinding speed and rewind tension to ensure the flattening of the winding rolls. The rewinding speed is up to 60m per minute;
D. Air shaft for rewinding can be changed freely among 3', 6'.
8. Electric contrl system completely uses international standard with quality, renowned parts and components. And it is dwsigned to operate, safely and conveniently.
Product Picture:
Product Specification:
| Model Number |
SYS-CPP1650 |
Film Width |
Max 1450MM |
Film Thickness |
0.03-0.20MM |
| Extruding Capacity |
60-230KGS/HR |
Screw Diameter |
100MM |
L/D Ration |
1:36 |
| Width Embossing Roller |
1600MM |
Effective Winding Width |
Max 1450MM |
Max Rewind Roll Diameter |
700MM |
| Power Supply |
140KW |
N.W. |
16T |
Machine Dimension |
13*6*4M |
| Remark |
As we continously keep working on research and improvement,we preserve the right to change all of the specification,design and charactersitics on this catalogue without notice. |
Thickness of extruded PP film:
0.03~0.20mm
T-die width:
1, 650mm
Applicable width of the film:
1, 450 mm (max. ) depends on product thickness
Max output:
240 kgs/hr (max. ) varies according to thickness, products and system of operations output, flatness and thickness within ± 5% tolerance.
Installed power:
140kw
Absorbed power:
Minimum 50-75kw
Air chiller refrigerater capacity: 45, 400 kcal/hr
Compressed air (min 6 bar):
Pressure: 7kgf/cm²
Exhaust: 0.7m³/min
Product Certification:
A)extruder:
1. Extruder screw and barrelø100mm X 36: 1 l/d (material 38 crmoal) by auto temperature control 6 zones and heating capacity 45kw
2. Manifold
No. 1 zone 1.1kw temerature control
3. Static mixer
Swiss/German mande 60mm X 240mm
4. Screen changer
By hydraulic cyclinder auto temperature control 1 zone
Heating capacity: 10.8kw
5. Hydraulic system
Oil system with 60 litre capacity power 2.2 kw
For operation of screen changer and forward/backward movement of extruder
From calender unit
6. Extruder of gear reduceritaly r21 200 up2a 1: 11.2
7. Extruder main driving motorac 75HP X 6p (55kw) inverter control
8. T-die
1650mm t-die
Mono layer flat by auto temperature control 11 zones
Lip opening: 0-1.0mm
9. Auto loader hopper / dryerconveying capacity 300kgs per hr / capacity 100kgs
Audited Supplier 
){kind=link}